PET bottle solutions
PET Syrup Bottles for Foodservice & Beverage Applications
Explore six PET syrup bottle models for syrup packaging and dispensing projects. Compare capacity and connection type before choosing a model, then send your packaging requirements for a quotation. If a pump is part of the project, request a compatibility review using the actual bottle information.
Product models
Browse PET Syrup Bottles by Capacity
Browse the current 750 ml, 1000 ml, 1100 ml and 1600 ml models. Open a product page for its confirmed capacity, material and connection information. Capacity alone does not identify the connection or establish a pump fit.
BY CAPACITY
750 ml
BY CAPACITY
1000 ml
BY CAPACITY
1100 ml
BY CAPACITY
1600 ml
Quick comparison
Compare PET Syrup Bottle Options
Threaded models list a neck size. The snap-on model lists a connection range instead. For 1001B-KK, 26–33 mm is a snap-on connection range, not a threaded neck finish or a guarantee of fit. Use the full model code when comparing the two separate 1100 ml products.
| Model | Capacity | Material | Connection Type | Neck Size / Connection Range | Application |
|---|---|---|---|---|---|
| 1001B-28/410 | 750 ml | PET | Threaded | 28/410 | Syrup packaging and dispensing |
| 1001B-28/400 | 1000 ml | PET | Threaded | 28/400 | Syrup packaging and dispensing |
| 1001B-KK | 1000 ml | PET | Snap-on | 26–33 mm | Syrup packaging and dispensing |
| 1001A-38/410 | 1100 ml | PET | Threaded | 38/410 | Syrup packaging and dispensing |
| 1001C-38/410 | 1100 ml | PET | Threaded | 38/410 | Syrup packaging and dispensing |
| 3001A-38/410 | 1600 ml | PET | Threaded | 38/410 | Syrup packaging and dispensing |
How to choose
How to Choose the Right PET Syrup Bottle
Start with the packaging requirement and the connection needed for your project.
01
Capacity
Specify the required volume and shortlisted model. Do not use capacity as a substitute for a bottle drawing or dimensions.
02
Connection / Neck Type
Identify whether the project uses a threaded or snap-on connection. See the Bottle Neck & Connection Guide before assuming that similar connection labels are interchangeable.
03
Product Application
Describe the syrup and the intended packaging and dispensing use. State any processing conditions or documentation requirements that must be reviewed for your project.
04
Pump Requirement
If a pump is required, include the required dosage and available pump reference. The Syrup Pump range is a starting point for selection, not a list of pre-approved pairings with these bottles.
05
Packaging / Customization
List requested packing or product changes in the inquiry. Confirm the available scope for the selected model; do not assume that a request is an approved option.
Pump matching
Need a Pump for Your Bottle?
Send the bottle model, connection details, dimensions and required dispensing output. Use the bottle measurement checklist to prepare photos and drawings, and the selection guide to review the complete requirement.
Are both 1000 ml bottles threaded?
No. 1001B-28/400 has a 28/400 threaded connection. 1001B-KK has a snap-on connection range of 26–33 mm; it is not a 28/400 or 28/410 threaded model.
Does the same model name confirm a bottle and pump set?
No. The bottle and pump are separate products. Send the actual bottle dimensions and connection details for a compatibility review.
Can these bottles be used for hot filling or a regulated application?
The listed data does not establish hot-fill performance, pressure suitability or a particular regulatory approval. Identify the required conditions and documents for review.
What are the minimum quantity, sample terms and lead time?
Include the model, quantity, destination and required date in your inquiry. Confirm minimum quantity, sample availability and costs, and timing with the sales team.
Bottle Model
Connection / Neck
Application
Dispensing Requirement
Bottle & pump inquiry
Need a Bottle & Pump Solution?
Send your bottle capacity, connection, quantity and destination to Zhongshan Baimei Plastic Industry Co., Ltd. Include the packing requirements, required date and, if a pump is needed, dispensing requirements and available bottle drawings or photos. For requested project changes, review the OEM & ODM information and confirm the available scope for the selected model.